Home
Back
GPM = lb/s × 60 / density
| From: | To: |
The Lb Per Sec To Gpm conversion calculates volumetric flow rate in gallons per minute from mass flow rate in pounds per second, using the fluid's density. This conversion is essential in fluid dynamics and engineering applications.
The calculator uses the conversion formula:
Where:
Explanation: The formula converts mass flow to volumetric flow by accounting for the fluid's density and converting time units from seconds to minutes.
Details: Accurate flow rate conversion is crucial for pipeline design, pump sizing, hydraulic systems, and various industrial processes where both mass and volumetric flow measurements are needed.
Tips: Enter mass flow rate in lb/s and fluid density in lb/gal. Both values must be positive numbers. Common fluid densities: water ≈ 8.34 lb/gal, gasoline ≈ 6.0 lb/gal, diesel ≈ 7.1 lb/gal.
Q1: Why is density important in this conversion?
A: Density determines how much volume a given mass occupies. Different fluids with the same mass flow rate will have different volumetric flow rates based on their density.
Q2: What are typical applications for this conversion?
A: Used in chemical processing, oil and gas industry, water treatment plants, HVAC systems, and any application involving fluid transport and measurement.
Q3: How accurate is this conversion?
A: Accuracy depends on the precision of the density value used. For precise calculations, use temperature-corrected density values.
Q4: Can this be used for gases?
A: Yes, but gas density varies significantly with pressure and temperature, so appropriate density values must be used for accurate conversions.
Q5: What if I need to convert to different units?
A: Additional conversion factors would be needed for other units like liters per minute or cubic meters per hour.